STRAIGHT OPERATOR FOR HINGED GATES
Code:
BL3924PSDDescription:
ARTICULATED OPERATOR FOR HINGED GATES - For gates: maximum length 2,5 m (3,5 m with an electric lock) - Straight arm version- Tehnical Details
ARTICULATED OPERATOR FOR HINGED GATES
- For gates: maximum length 2,5 m (3,5 m with an electric lock)
- Straight arm version
REDUCED BASE ELECTROMECHANICAL UNIT WITH A 24 Vac MOTOR
The system is composed of an integral "master" unit and a "slave" geared motor driving
the second hinged gate. The gate position is encoder controlled and self-programming thus
reducing installation times to a minimum and optimising the programming procedure. This
compact well-organized unit houses an efficient 24V motor and a robust high performance
4-stage geared reduction unit lubricated using permanently fluid grease.
The reduction unit contains a release system that separates the gears from the gate allowing
it to be manoeuvred manually. The master unit is fitted with an electronic programmer with
an inbuilt receiver module and a microcontroller managed battery charger plus special Cardin
emergency batteries NiMH 24V. The automation features a robust cast aluminium operator
arm with self-lubricating joints. The extremely small base (L max 171 mm) has a practical
counter plate fastening system that allows fine adjustments and levelling before the motor
is fitted to the column. Reversible and self-locking versions are available. Both versions are
fitted with a key operated release system.
The set consists of:
1 master unit 200/BL3924ESB complete with an electronic programmer;
+ receiver 43 MHz "FM"
+ battery charger
+ NiMH batteries
1 slave unit 200/BL924SB driving the second gate
2 4 -channel transmitters TRQ449400.
1 10-metre connection cable CABPC10.
- For gates: maximum length 2,5 m (3,5 m with an electric lock)
- Straight arm version
REDUCED BASE ELECTROMECHANICAL UNIT WITH A 24 Vac MOTOR
The system is composed of an integral "master" unit and a "slave" geared motor driving
the second hinged gate. The gate position is encoder controlled and self-programming thus
reducing installation times to a minimum and optimising the programming procedure. This
compact well-organized unit houses an efficient 24V motor and a robust high performance
4-stage geared reduction unit lubricated using permanently fluid grease.
The reduction unit contains a release system that separates the gears from the gate allowing
it to be manoeuvred manually. The master unit is fitted with an electronic programmer with
an inbuilt receiver module and a microcontroller managed battery charger plus special Cardin
emergency batteries NiMH 24V. The automation features a robust cast aluminium operator
arm with self-lubricating joints. The extremely small base (L max 171 mm) has a practical
counter plate fastening system that allows fine adjustments and levelling before the motor
is fitted to the column. Reversible and self-locking versions are available. Both versions are
fitted with a key operated release system.
The set consists of:
1 master unit 200/BL3924ESB complete with an electronic programmer;
+ receiver 43 MHz "FM"
+ battery charger
+ NiMH batteries
1 slave unit 200/BL924SB driving the second gate
2 4 -channel transmitters TRQ449400.
1 10-metre connection cable CABPC10.